Technology Of Application Of 1-MCP In Trucks-refrigerators
Detailed instructions on the use of Aoweite 1-MCP for use in trucks-refrigerators The trucks-refrigerator located at the place of loading can be processed with the help of the 1-MCP powder, but it is more convenient to process it with the tablet one. For trucks to process with the help of...
Detailed instructions on the use of Aoweite 1-MCP for use in trucks-refrigerators
The trucks-refrigerator located at the place of loading can be processed with the help of the 1-MCP powder, but it is more convenient to process it with the tablet one. For trucks to process with the help of Aoweite 1-MCP tablet, there is no need to stand in place waiting for the processing finish, which is usually equiped with electric generator and lose time in the parking lot.
For the application of this type of tablet, the processing takes place in a plastic canister, fixed inside the truck-refrigerator, filled with measured amount of catalyst and dosage of the drug.
Processing of agricultural products, transported for long distances by road transport, it is desirable to carry out in bodies of trucks-refrigerators, equipped with the installations of cooling and internal ventilation. Before processing, the products should be pre-cooled to the temperature of treatment, after which you can start the process. The temperature depends on the variety of your target fruits and vegetables. The exposure time during the treatment of the drug is, on average, 24 hours. Fruits, subjected treatment, should be collected in a state of removable maturity and processed not later than after 5-7 days.
In the process of processing the Chamber of the refrigerated wagon is closed hermetically. In a day it necessarily airs, a working solution from the reactor-activator disposed, then carry the products further, or unload it to the consumer at a destination.
The process of application of the preparation consists of several steps:
1. It is necessary to calculate the quantity of 1-MCP. For this purpose it is necessary to measure an internal volume of the truck in cubic meters, for what it is necessary to multiply length, width and height of a storage chamber in meters on each other.2. The 1-MCP can be supplied as tablets, with the correspondent catalyst.
3. Take all necessary measures to organize internal circulation of air inside the body. To do this, switch the truck ventilation mode to internal air circulation.
After loading the whole truck with pallets of products at the end of
the body, install the plastic canister
and fix it with its bottom sticker vertically.
5. Add a dose of 1-MCP tablets, and close the body of the truck-refrigerator and switch on the mode of internal air circulation. After that, the truck can be sent to the destination immediately.
6. 24 hours pass, while the truck opens, and the body is carefully airsed. The contents of the plastic canister disposed.
7. Further truck should be to the place of destination in the usual way, or the products begin to unload from the final consumer, if truck reaches the destination.
The cost of processing and the procedure of settlements can be discussed in a personal meeting.
Welcome to contact us!